MIL-DTL-16377/53D
Portable lantern handle assembly: See figure 5 for Symbols 100.2 and 100.2L and figure 8 for Symbols 100.3
assembled as indicated.
Switch:
Switch shall be non-sparking and watertight toggle.
Boot:
Boot shall be in accordance with MIL-DTL-5423/2.
Gasket:
See figure 17. Material shall be neoprene rubber 45-55 durometer A.
Relay lantern top plate assembly: See figure 6 for Symbols 101.2, 101.2L, 102.2, 102.2L, 108, and 108L. See
figure 9 shall be furnished assembled as indicated.
Packing assembly:
Packing assembly shall be in accordance with ASTM F1836M.
Test switch:
Test switch shall be pushbutton, momentary, sealed, non-sparking or
magnetic actuating, meeting the below requirements.
Electrical life:
25,000 cycles minimum
Mechanical life:
100,000 cycles minimum
Operating temperature:
32 to 185 °F (0 to 85 °C)
Boot:
Boot shall be Style 2, Size 3 of MIL-DTL-5423/7.
Gasket:
See figure 17. Material shall be neoprene rubber 45-55 durometer A.
Cable:
Cable shall be 10 feet of type LSTHOF-3 in accordance with
MIL-DTL-24643/3.
Bracket assembly:
See figure 11. Material shall be steel; zinc plated.
Wire assembly:
See figure 22.
Ground connection:
The metal neck of the pushbutton switch and the relay metallic frame shall
be electrically connected to the green lead of the supply cable for grounding
to ship s structure.
Wiring:
Interconnecting and power leads shall be connected to relay and switch
terminals using solder or crimp style connectors. Wire nuts shall not be
used.
Insulating sleeve:
Shrink-on insulating sleeves shall be installed over all electrical connections
carrying 120 or higher voltage. No metallic parts of such connections shall
be exposed. Insulating sleeves shall not be loose or allowed to move.
Insulating sleeves are not required for ground connections or electrical
connections of the battery circuit.
Relay:
of table II.
Rechargeable retrofit kit:
Bulkhead mounted:
The rechargeable retrofit kit shall convert a bulkhead mounted Symbol
101.2 (non-rechargeable) lantern into a Symbol 101.3 (rechargeable)
lantern. The rechargeable retrofit kit shall consist of a charger/control
module, a rechargeable top plate (see figure 9) without cable, and the
appropriate wiring and connectors. The rechargeable battery specified
herein shall be acquired separate from the rechargeable retrofit kit. The
configuration of the charger/control module and the rechargeable battery
shall be such that they cannot be placed in the incorrect position.
Portable:
The rechargeable retrofit kit shall convert a portable Symbol 100.2
(non-rechargeable) lantern into a Symbol 100.3 (rechargeable) lantern. The
rechargeable retrofit kit shall consist of a charger/control module, top
handle assembly (see figure 8), and the appropriate wiring and connectors.
The rechargeable battery specified herein shall be acquired separate from
the rechargeable retrofit kit. The configuration of the charger/control
module and the rechargeable battery shall be such that they cannot be
placed in the incorrect position.
26
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business