MIL-DTL-16377/53D
REQUIREMENTS:
Type:
II and III
Class:
1
SYMBOL NUMBERS:
100.2/100.2L:
Lantern, portable, with handle and mounting bracket/LED model.
100.3/100.3L:
Lantern, portable, rechargeable with handle and mounting bracket/LED model.
101.2/101.2L:
Lantern, bulkhead, relay, 115 VAC/LED model.
101.3/101.3L:
Lantern, bulkhead, rechargeable, 115 VAC/LED model.
102.2/102.2L:
Lantern, bulkhead, relay, 115 VDC/LED model.
108/108L:
Lantern, bulkhead, relay, 230 VDC/LED model.
DESIGN:
Dimensions and configurations:
Material:
Box, cover, lamp retainer:
Material for box and cover lamp retainer shall be molded plastic. The color
of molded parts shall be yellow conforming to color number 13415 of
FED-STD-595 attained without resort to painting, enameling, or other
post-molding applications. Plastic material shall be in accordance with
ASTM D5948 or one of the following: Floerite number X5064, Glaskyd
number 1902, Plaskon number 446, Raflon number 1030, or equal.
Screws:
All screws shall be brass.
Lockwashers:
All lockwashers shall be phosphor-bronze, internal-lock.
Inserts:
All inserts shall be brass.
Lantern assembly (complete)
and typical mounting:
Body assembly:
assembled as indicated.
Bolts:
Gaskets or bolts with self-contained gaskets shall be furnished so as to seal
the mounting holes against the entrance of water where the body is
assembled and mounted in the condition shown on figure 2.
Mounting bolts:
O-ring:
O-ring gaskets shall be furnished to seal the mounting holes against the
entrance of water when the body is assembled and mounted in the condition
shown on figure 2.
LED cluster description:
The LED cluster shall be balanced by electronic circuitry to provide evenly
distributed light output in accordance with LED manufacturer
specifications. The LED cluster shall also provide luminance equal to or
greater than that included on figure 25. The LED cluster s power terminals
or wiring, as appropriate, shall indicate polarity for proper installation.
Lamp:
Lamp shall be PAR-36 screw incandescent terminal lamp and provide
luminance equal to or greater than that included on figure 24.
Lamp contact assembly:
See figure 19. The plunger shall work freely in the sleeve without rubbing
or coming adrift.
Battery contact connectors:
See figure 20. Material shall be brass, half hard. Battery contact connectors
shall be silver plated.
Wire assembly:
See figure 22.
Gasket, lamp:
See figure 16. Material shall be neoprene rubber, 45-55 durometer A.
Gasket, cover:
See figure 18. Material shall be neoprene rubber, 45-55 durometer A.
25
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business