MIL-DTL-16377/17B(SH)
SSL REQUIREMENTS:
CLASSIFICATION:
Type:
III
Class:
2
SYMBOL NUMBER:
229.1SSL: Complete lighting fixture assembly, for rail mounting, with LED luminaire and white diffusing
window assembly.
231.1SSL: Complete lighting fixture assembly, for spring type berths (bunks), with LED luminaire and white
diffusing window assembly.
232.1SSL: Complete lighting fixture assembly, for pan type berths, bulkhead or bar mounting, with LED
luminaire and white diffusing window assembly.
DESIGN:
Electrical rating:
8 watts maximum, 120 volts, 60 hertz.
Dimensions and configuration:
Photometric data:
Initial light output shall be within +20 percent and -10 percent of
Chromaticity:
See 3.7.4 of MIL-DTL-16377.
Fail-safe circuit:
See 3.17 of MIL-DTL-16377.
Material:
Material for enclosure, lamp cover, mounting plate and mounting
brackets shall be aluminum or plastic Type MAI-60 in accordance with
ASTM D5948.
Finish:
Finish shall comply with 3.8.3.4 of MIL-DTL-16377, except that color
shall be beige conforming to Color Number 26586 of FED-STD-595.
Cable strain relief:
Strain relief for cable shall be provided as shown on figure 2.
Grounding:
Aluminum enclosure: See figure 2;
Plastic enclosure: The reflector, ballast frame and exterior metal parts
of switch shall be grounded to receptacle ground contact.
Receptacle:
Receptacle shall be Leviton part number 1374-051 (ivory), or equal
except that the ground contact shall be nickel-plated 0.0003 inch thick.
Wiring:
Shall maintain same control scheme for light output as legacy
fluorescent fixture. Refer to figure 8.
Cable:
10 feet of Type LSMHOF-7 in accordance with MIL-DTL-24643/7.
Weight:
4 pounds 2 ounces maximum.
Designation and marking:
The following labels shall be furnished in accordance with MIL-DTL-16377
a.
Two Type I.
One Type IV. The information to be shown on the Type IV label shall be "USE THE
b.
FOLLOWING REPAIR PARTS ONLY:" followed by:
(1) A list of all standard parts shown in table I by name and stock number only, if appropriate, or
(2) A list of available replacement parts and stock numbers, or if unavailable, manufacturer s part
numbers.
Standard parts:
The standard parts shown in table I shall be used in the construction of the fixtures
specified herein.
8
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business