MIL-DTL-16938D
f. Painting instructions, including method of treatment of searchlights for painting, color,
and applicable specification of paint. If powder coating is used, include the method of treatment
of searchlights for powder coating, color, and applicable specification of powder coating.
g. Data which will appear on the searchlight identification plate to be supplied in
accordance with the drawing.
3.13.1 Product drawings/models and associated lists. Product drawings/models and
associated lists shall be prepared to provide the design, engineering, manufacturing, and quality
assurance requirements information necessary to enable the procurement or manufacture of an
item essentially identical to the original item. The product shall be defined to the extent
necessary for a competent manufacturer to produce an item, which duplicates the physical,
interface, and functional characteristics of the original product, without additional design
engineering effort or recourse to the current design activity. Product data shall reflect the
approved, tested, and accepted configuration of the defined delivered item.
3.14 Manuals. Manuals shall be furnished in accordance with MIL-DTL-24784/22.
3.15 Identification and marking plates. Identifications plates and other designating
marking plates shall be made of corrosion-resisting steel, brass, or aluminum, in accordance with
MIL-DTL-15024 and MIL-P-15024/5. These plates shall be of sufficient size, and shall be
installed on and furnished as a part of the searchlight for which they are intended. They shall be
attached to a part which will not ordinarily be renewed during its service life, and shall be
located in a readily accessible position.
3.15.1 Data marked on the identification plate shall include the following:
a. Manufacturer's name.
b. Identification symbols.
c. Searchlight serial number.
d. Contract number.
e. Date of manufacture (year).
f. "Eight-inch signaling searchlight, Model______" (as assigned).
g. The marking "NM" stamped or embossed on the identification plate to designate
nonmagnetic material.
h. Blank space for Defense Contract Administrative Service stamping.
3.16 Recycled, recovered, or environmentally preferable materials. Recycled, recovered,
or environmentally preferable materials should be used to the maximum extent possible,
provided that the material meets or exceeds the operational and maintenance requirements, and
promotes economically advantageous life cycle costs.
9
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business