MIL-DTL-16938D
3.8 Voltage.
3.8.1 Type I. Type I searchlights shall be designed for operation at the 115 volts,
60 Hz AC with provisions of voltage reduction to 23 to 28 volts, 60 Hz lamp operation.
3.8.2 Type II. Type II searchlights shall be designed for operation at 28 volts,
60 Hz AC/DC.
3.9 Lamp. The lamp shall be an incandescent type in accordance with part number
MS25242-4552 of MS25242.
3.10 Receptacle and searchlight cable plug. The receptacle, plug, and connecting cables
between components shall be shipbuilder furnished equipment.
3.11 Repair parts. Onboard repair parts shall be furnished in accordance with
MIL-DTL-24784 and MIL-DTL-24784/7, and shall consist of the following items unless
otherwise specified (see 6.2):
1 - Glass cover
1 - Operating lever
3 - Springs, right side
3 - Springs, left side
1 - Lamp gasket
3 - Incandescent lamps
3.12 Weight (searchlight). The searchlight, exclusive of the filter assembly, shall not
exceed 18 pounds.
3.13 Drawings. Drawings shall be furnished and shall conform to ASME Y14.24,
ASME Y14.34, ASME Y14.35M, and ASME Y14.100 and shall contain:
a. Name and model number assigned to the searchlight. Upon acceptance of the
preliminary drawings the Naval Ship Engineering Center (NAVSEC) will assign the model
number, which shall appear on the searchlight identification plate, all repair parts boxes, all
manuals, and the assembly drawing. NAVSEC will also assign a model number for the signaling
shutter, which shall appear on the shutter, all manuals and on the assembly drawing.
b. A list of repair parts, the name of each item, the quantity of each item being furnished
in each set of repair parts and the manufacturer's ordering identification. This list shall be a
duplicate of the list which is placed inside the repair parts box.
c. Table of weights:
(1) Weight of searchlight assembly, complete.
(2) Weight of repair parts, including boxes.
(3) Weight of searchlight, created with repair parts box.
d. Dimensioned assembly outline (to scale) showing all principal dimensions in at least
front view and a side view.
e. Mounting plate or foot with detailed dimensions for mounting.
8
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business